Menu
Your Cart

Corkjoint® N.E.C Resin Bonded (Type II) Cork Fillerboard 915MM (L) x 610MM (W) x 10MM (T)

Corkjoint® N.E.C Resin Bonded (Type II) Cork Fillerboard 915MM (L) x 610MM (W) x 10MM (T)

RM57.15
Price in reward points: 22800
Products Sold: 11
Product Views: 7628
Add to Cart
Click to share this page to your friends & families and start earning. Affiliate

SPECIAL ORDER  Special Orders require 7 to 14 working days to be ready for collection or delivery and some products might take longer to order in. Please contact us for more information or estimated delivery time before placing your order. 

  

Description 

  • Corkjoint® N.E.C is a non-expanding resin bonded cork fillerboard made from natural clean cork with resin binder and contains no bitumen and it is very eco-friendly.. 
  • As a natural based product, Corkjoint® N.E.C is not only able to withstand heavy trafficable conditions but also environmental and climatic changes and has anti termite resistance.. 
  • The high density of Corkjoint® N.E.C ensures long life compression and recovery, making it highly can be drilled for dowel joints to pass through.. 
  • Corkjoint® N.E.C Cork Fillerboard is manufatured to ASTM Type II from high grade granulated cork and resin binders making it highly suitable as a fillerboard support for joint sealants for use in movement joints.. 
  • Supplied in sheet 915mm x 610mm in variety of thickness. Also available upon request with a tear off cap to suit the joint sealant application depth.. 

  

Features 

  

Area of Application 

AREA OF APPLICATION
FoothpathsReservoirs
DrivewaysDams
Pedestrian mallsWater treatment plants
Brick or block wallsSewage treatment plants
Heavy trafficable areasSwimming pools
Ideal for wet areasHighways and bridges
Water tanksAirport runways

  

Physical Properties 

PROPERTYTEST METHODRESULT
Pressure to compress to 50% of thickness (kPa)ASTM D1752-Type II750
Recovery in one hour after compression (%)ASTM D1752-Type II92
Extrusion (mm)ASTM D1752-Type II1.6
Boiling in hydrochloric acidASTM D1752-Type IIPass
Accelerated weatheringASTM D1752-Type IIPass
Water resistantASTM D1752-Type IIPass
Fungus & pest resistantASTM D1752-Type IIPass

  

Installation Procedures 

CORKJOINT® N.E.C Cork Fillerboard is supplied to site packaged ready for use. Simply glue in place against the existing slab and pour the concrete against it. Void formers can be used to remove later to allow for a sealant over the top or use it to the surface of the concrete.  

  

Typical Applications 

  

Written Specification 

Where shown in the drawings, the expansion joint fillerboard shall be Corkjoint® N.E.C Cork Fillerboard manufactured to ASTM D1752 Type II from high grade granulated cork and resin binders, with a minimum density of 200 - 250kg/m³. The application / installation of the product must be in accordance with the manufacturer's recommendations. 

  

Health And Safety Information 

For further information or advice on health and safety precautions, safe handling, storage and correct disposal of products, please refer to the most recent product Material Safety Data Sheet (MSDS), which is available upon request. 

  

 

  

Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics. 

Write a review
Note: HTML is not translated!
Bad Good
Captcha