Sissons Masonry Paint is a specially formulated decorative wall finish to meet economic needs. It is suitable for interior and exterior cement plaster walls, ceilings, asbestos, hard and soft boards and other cementitious based surfaces. It is durable, easy to apply and when dry, presents a pleasing matt finish that is fungus resistant with good opacity

Features

Colours Available

Surface Preparation:

Surfaces to be painted must be clean, dry and free from loose and flaking materials. Remove fungus and all loose and powdery residues with a wire brush under running water or a high-pressure water jet. Areas affected by fungus and algae growth should be treated with Sissons Anti-Mould Solution. Seal with one (1) coat of Sissons Alkali Resisting ‘D’ Primer where high alkalinity is present. Do not paint on walls where moisture is high or during wet weather.

Thinning:

Thin with 15-20% by volume with water depending upon surface porosity.

Application:

By brush, roller or spray.

Drying Time:

Approximately 2 hours.

Number Of Coats:

2 coats.

COVERAGE:

Approximately 11 sq. metres per litre.

Cleaning Up:

Clean with clean water immediately after use.

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.