Menu
Your Cart

KTH Two Pack Epoxy Primer Protective Coating (16L Epoxy Primer + 4L Epoxy Hardener) 20L - Light Grey

KTH Two Pack Epoxy Primer Protective Coating (16L Epoxy Primer + 4L Epoxy Hardener) 20L - Light Grey

RM742.60
Price in reward points: 296800
Products Sold: 0
Product Views: 1724
Add to Cart
Click to share this page to your friends & families and start earning. Affiliate

Description 

2 – PACK EPOXY PRIMER is a high build two-component epoxy resin-based primer cured by polyamide activator. It has excellent adhesion on a wide range of substrate, thus when combines with epoxy and polyurethane as subsequent coating, provides abrasion resistance paint film that protects against the atmosphere and marine environment, and resistant to general chemicals.

      

    Uses

    As a primer and intermediate coat of the epoxy and polyurethane system. Suitable for use on concrete and steel surfaces where a high degree of chemicals, oil, and abrasion resistance is required.

     

    Surface Preparation

    Concrete Surface:

    Remove all previous coating and chalk by light abrasive blasting. If abrasive blasting is not available, etch the new and uncoated concrete surface with about 5% sulphuric acid solution followed by thorough rinsing with clean water. Allow the surface to dry completely prior to painting application.

     

    Steel Surface:

    The mild steel substrate must be completely dry and free from rust, mill scale, dirt, grease, and other contaminants before painting. For maximum adhesion and durability of paint performance, all bare metals should be abrasive blasted to SA21/2 standard prior painting.

     

    Safety Precaution

    1. This product is flammable.
    2. Keep away from sources of ignition.
    3. Keep container tightly closed and keep out of reach of children.
    4. Wear suitable personal protective clothing during painting.
    5. Ensure adequate ventilation.
    6. Do not breathe or inhale spray mist.
    7. Do not apply when the relative humidity exceeds 85%.
    8. Avoid skin and eye contact. Spillage on the skin should be removed immediately with cleanser, soap, and water. The eye should be well flushed with water and seek medical advice immediately if discomfort persists.

     

    Safety Data Sheet (SDS).pdf

    Technical Data Sheet (TDS).pdf

     

    Disclaimer 

    All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics. 

    Write a review
    Note: HTML is not translated!
    Bad Good
    Captcha