Obaproof MS 609 is a low modulus, one component, flexible polyurethane joint sealant. When cured it will form a tough, flexible seal capable of cyclic expansion and compression movement. Obaproof MS 609 can be applied to external and expose UV and the normal weather condition.

Advantages

Single component
Flexible
Good bonding
Exposable to UV
High elongation
Weatherproof
Waterproof
Low modulus
Durability

Specifications

Appearance: Paste form
Elongation at break ASTM412: >700%
Tensile strength ASTM412: 1.3N/mm2
Curing time: Touch-free: 6 -8 hours Fully cure: 7 Days
Curing time by thickness: 2mm/24 hours
Chemical resistant: Salt, Water, Alkaline, Diluted acids, Petroleum, Diese
Temperature: Application temperature: 6°c - 36°c
Service temperature: -20°c to 70°c
Colour range: Grey, Black, White

Application Area

Construction joint
Expansion joint
Aluminium panel
Brickwork
Metal roofing joint sealing
Precast concrete
Screeding
Insitu concrete
Granite marble

Application Tools

By sealant gun or by paste

Storage

Material to be stored in the cool dry place.

Packing

600ML/PC

Safety

Application is recommended to wear gloves, during application.
In case of contact, wash the affected area with water and soap.
No food or beverages allowed during application.
Keep the material away from children.

Directions

Substrates must be clean, dry, and free from grease. Remove all dirt, oil, grease, detergents, and loose material.
Cut the tip off the cartridge. Cut nozzle to the desired size at a 45°angle. Screw nozzle onto the cartridge. Insert the cartridge into the caulking gun.
Push sealant ahead for uniform bead
Clean off excess sealant with M.E.K. or Toluene before dry.

Skinning Time

Obaproof MS 609 will skin forming in approximately 20 minutes

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, color, and other relevant characteristics.