How I build an Epoxy Resin Table Top using Bakau (Mangrove) Tree & Home Store HL310 Epoxy Resin P1

 

Epoxy Resin HL310 is a colourless transparent epoxy system specially crafted for casting river tables, jewelry, and artwork. It has low calorific value, good smoothness, natural defoaming, low viscosity, high strength, and hardness that cured at room temperature or heating.

Shop online now at https://bit.ly/3giM7KF

Application

1. Our Epoxy Resin HL310 ratio is 3:1 by weight. A is 3 and B is 1 or 3kg A + 1kg B.

2. After AB is mixed, stir evenly. Add pigments to stir, if required.

3. Working time: 30-60 minutes, please use it as soon as possible within the specified time.

4. Cure time: 12-24 hours at 25 degree. If your place is cold, it may take longer.

5. For the first timer, please try a small portion and apply no more than 5cm thick casting.

*Note: Accurate proportioning and thorough & uniform mixing is the key to the best performance of the epoxy resin system. When mixing, be sure to stir the sides, bottom and corners of the mixing container evenly.

 

Storage & Handling Precautions 1. Store in ambient temperature and dry place. 2. Stir well before use. 3. Keep the container tightly closed. 4. Clean all containers, application materials with an organic solvent or detergent as soon as after been used. 5. Operators should avoid any contact with eyes, skin, and clothing. 6. Put on gloves during work.

The mangrove forests in Malaysia, occur mainly along the west coast of Peninsular Malaysia, at the estuaries of Sarawak (1st Division), Rejang (6th Division) and Trusan-Lawas (5th Division) rivers of Sarawak and along the east coast of Sabah. Mangroves comprise less than 2% of the total land area in Malaysia. For more information, please visit www.ewarehouse.my - Malaysia's Largest Home Improvement

Online Store. #atkc #ewarehouse #homeimprovementstore #homestore #hl310 #epoxyresin