Duthaco Bond-It Advanced Technology Copolymer Resinous Bonding Agent 20L - Blue

BOND IT™ Advanced Technology Copolymer Resinous Bonding Agent is a water-based PVA resin bonding agent designed to enhance adhesion for cement mortar and all types of cementitious products. Suitable for various substrates, including damp surfaces.

Technical Data

• Colour: Blue
• pH Value: 8
• Form: Liquid (Water-Based)
• Chemical Base: Polyvinyl Acetate Homopolymer Resin
• Tensile Strength: 1.0 N/mm²
• Flexural Strength: 114 psi
• Density: 8.9 lbs/gal (1.07 kg/L) – ASTM D1475
• Solid Content: >48% – ASTM D5207
• Packing: 20 Litres
• Coverage: Approx. 1 Litre / 15m²

Advantages

• Suitable for all types of surfaces
• High tensile and flexural strength
• Moisture resistant (works on damp surfaces)
• Ready to use (no dilution required)
• Easy application (no skilled worker needed)
• Blue tinted for easy visibility
• Withstands vibration and heat
• Time & cost saving (no hacking or chipping required)
• Cost-efficient solution

Recommended Applications

Tile Installation

• Homogeneous tiles, porcelain tiles, wall & floor tiles, marble, granite (interior & exterior)

Plastering & Floor Rendering

• Suitable for concrete, steel, aluminium, wood, glass, PU waterproofing, and more

Rectification Works

• Thin cement floor patching
• Direct tiling on existing tile bed
• Tile-on-tile application
• Covering crack lines without hacking
• Cold joints & partition joints

Other Uses

• Panel systems, swimming pools, poly-foam works

Application Procedure

1. Ensure the substrate is clean (free from dust, oil, grease, or contaminants).
2. Apply one coat using a paint roller onto the substrate or back of tiles.
3. Leave to dry for 15–30 minutes until a semi-transparent film forms.
4. Proceed with tiling, plastering, patching, or rendering as usual.
5. ⚠️ Do NOT mix with water or any other liquid.