Duthaco Bond-It Plast Ready-To-Use Advanced Plaster Bonding Agent 20L - Blue

BOND IT PLAST Advanced Plaster Bonding Agent is a single-component, water-based concrete bonding agent formulated with advanced PVA homopolymer resin. It is non-toxic, non-flammable, and suitable for high-humidity conditions.

Designed primarily for plastering and rendering works on various substrates.

Technical Data

• Color: Blue
• pH Value: 8
• Form: Liquid (Water-Based)
• Chemical Base: Polyvinyl Acetate Copolymer Resin
• Tensile Strength: 2.50 N/mm² (NSG)
• Flexural Strength: 218 psi
• Density: 8.9 lbs/gal (1.07 kg/L) – ASTM D1475
• Solid Content: >48% – ASTM D5207
• Packing: 20 Litres
• Coverage: Approx. 1 Litre / 15m² (non-porous surface)

Key Advantages

• Suitable for all types of surfaces
• Multi-purpose applications
• High tensile and flexural strength
• Moisture resistant (wet-on-wet application)
• Ready to use (no dilution required)
• Cost-efficient
• Blue tinted for easy visibility
• Easy to apply (no skilled worker required)
• Saves time & cost (no hacking needed on painted surfaces)
• Heat resistant
• Withstands vibration
• Reduces surface defects

Recommended Applications

Plastering

• Concrete (interior & exterior), lightweight blocks, steel, aluminium, wood, glass, PU waterproofing, and more.

Floor Rendering

• Suitable for concrete slabs and various substrates.

Rectification Works

• Plaster debond repair
• Thin cement floor patching
• Crack covering without hacking
• Thickness range: 2mm – 70mm

Application Procedure

1. Ensure the surface is clean and free from dust, oil, grease, or contaminants.
2. Apply one coat using a paint roller onto the substrate.
3. Allow to dry for 15–30 minutes until a semi-transparent film forms.
4. Proceed with plastering or rendering as usual.
5. ⚠️ Do NOT mix with water or any other liquid.