Bostik A330 FILL A GAP FLEX is a high-quality sealant based on acrylic dispersion. After application, the product cures to a solid plasto elastic rubber by evaporation of water from the sealant.
- Paintable with water-based and synthetic paints
- Perfect adhesion without use of a primer on most, even slightly damp substrates
- Versatile economic acrylic sealant
- Almost odourless
- Easy to apply and clean
- Non-corrosive towards metals
|Application rate||@ Ø3 mm/4 bar||2000 g/min|
|Application temperature|| ||+5°C to + 40°C|
|Base|| ||Acrylic dispersion|
|Density||ISO 1183-1||1,52 g/ml|
|Elongation at break||DIN 53505/ ISO 868||245%|
|Flow||ISO 7390||< 0 mm|
|Frost resistance during|
| ||Up to - 15°C|
|Shore A hardness||DIN 53505 / ISO 868||53|
|Skin formation||DBTM 16||3 minutes @|
|Temperature resistance|| ||-20°C to + 75°C|
|Tensile Strength||DIN 53504||0,69 N/mm²|
|Product Data Sheet (PDS).pdf|
* These values are typical properties and may vary +/-3%
Bostik A330 FILL A GAP FLEX was specifically developed for sealing connection joints between stairs, walls, ceilings, skirtings, windowsills, wooden and metal window frames, concrete and brickwork. For interior use.
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.