Nippon Paint Vinilex 5400 Wall Sealer For Interior & Exterior 5L
Nippon Paint Vinilex 5400 Wall Sealer For Interior & Exterior 5L
- Brand Nippon Paint
- Model: NV5400WS-5L
Description
Nippon Vinilex 5400 Wall Sealer is an acrylic water-based wall sealer for interior and exterior walls. It is specially formulated to protect finishing coats against the effects of mild alkalinity and moisture from the substrate. For use on plastered walls, ceilings, brickwork, hardboard, softboard and asbestos. Technical Data Sheet (TDS).
| Paint Type | Water-Based |
| Product Type | Interior & Exterior |
| Finishing | Matt |
| Recommended Substrate | Masonry, brick, plastering substrate, and fibreboard |
| Packing Size | 5L |
Composition
- Pigment: Titanium Dioxide and Mineral Extender
- Binder: Styrene Acrylic Emulsion
- Thinner: Water
| Technical Data | |
| Drying Time | Touch Dry: 15 minutes (Dependent on temperature and humidity) |
| Hard Dry: 1 hour (Dependent on temperature and humidity) | |
| Recoating Time | 2 hours minimum (Dependent on temperature and humidity) |
| Dry Film Thickness | Around 30 μm per coat |
| No. of Coats | 1 coat |
| Theoretical Coverage | 10 – 12 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) |
| Volume Solid | ~ 34% |
Application Method
- Brush / Roller: Dilute the paint with not more than 5% of water. Preferable not dilute for best performance.
Recommended Coating System
- Sealer/Primer: 5400 Wall Sealer : 1Coat
- Topcoat: Nippon Interior Products/ Nippon Exterior Products: 2 Coats
Surface Preparation
Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven surfaces with suitable fillers. Smoothen the filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Spot prime with 5400 Wall Sealer.
Cleaning
- Clean up equipment with water immediately after use.
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics
