Kingkote KK833 UV Protection Enhanced Coating 20L

Description 

Kingkote KK833 UV Protection Enhanced Coating is formulated as water-based composed of acrylates of polymer latex. KK833 is suitable to be used for surfaces coating protection. It also provides UV reflection on the building. It has the function of dust control and gives a shiny look to the surface of buildings. 

Characteristics 

• KK833 is designed as a protective coating to enhance the surface of the application area.
• KK833 can be diluted by water in vary ratio for different purpose accordingly.
• KK833 provides UV protection to strengthen then colour durability and extend the lifespan of the paint.
• KK833 is able to enhance the interface and adhesion of the topcoat, prevent from weathering.
• KK833 is odourless and water cleanable. It is an environmentally friendly product.

Recommended Uses 

• Concrete: Balcony, RC slab, RC roofing, RC gutter; Exterior/Interior Wall and etc.
• Metal: Metal roofing, water tank, metal gutter, and etc.
• Wooden: Wooden furniture, chipboard, etc.

Application Instruction 

• Clean the entire application surface.
• Stir well before the application.
• Dilute the KK833 by water with the recommended ratio depend on the purpose of use.
• By spraying; rolling and brushing.
• Coverage approximately 5~10m²/L. 
• Do not apply when the weather is rainy, foggy or wet.

Colour 

• Colourless. 

Technical Data 

• Solid content: 50% +/- 1. 
• Content: Acrylates of Polymer Latex. 
• Viscosity: CPS 3000 ~ 3500 (25°C). 
• PH value: 7.5 - 8.5. 
• Fume: Non-stimulus. 
• Flame ability: Non-inflammable. 
• Toxin: None. 
• Dilution: By water. 
• Dilute ratio: 1:0.05 ~ 1:3. 
• Permeability: Excellent. 
• Tack free time: 1 hour (35°C). 
• Curing time: 8 hours (35°C). 

Packaging 

• 20 Litre. 

Safety And Health 

• Rinse with plenty of water and consult the doctor immediately if the coating splash into eyes.
• Wash with water if the coating contacted to skin. (No need thinner). 

Shelf life 

• 3 years in an unopened container and stored in a cool and dry place.
• Reseal the remaining coating properly and keep it in store.

Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.