Mapei Mapeflex MS45 Hybrid Elastic Sealant & Adhesive 300ML - Grey
Mapei Mapeflex MS45 Hybrid Elastic Sealant & Adhesive 300ML - Grey
RM35.00
Price in reward points: 14000
- Brand MAPEI
- Model: MP-MS45
Products Sold: 0
Product Views: 1983
Where To Use
Mapeflex MS45 has been specifically developed for sealing expansion, fillet and distribution joints on horizontal and vertical surfaces. It is also recommended to form internal and external flexible bonds between similar and dissimilar materials commonly used in the building industry and to replace or integrate mechanical fasteners.
Advantages
- Multi-purpose sealant and adhesive to solve an array of routine problems.
- Compatible for use with different materials, including those with an uneven surface.
- Good adhesion on many of plastic materials.
- Easy to extrude and smooth over, even at low temperatures.
- Excellent stability to UV rays.
- Solvent-free and odourless.
- Certified ISO 11600 F20HM, ensures guaranteed performance levels.
- Very low emission level of VOC, certified EC1 R Plus.
- May be painted over after hardening.
- Elastic bond to absorb thermal movement and vibrations.
- Heavy-duty plastic cartridge to prevent damage during use.
- Technical Data Sheet (TDS).
Technical Data (typical values)
Product Identity | |
Classification according to EN 15651-1: | F-EXT-INT-CC, class 20 HM |
Classification according to EN 15651-4: | PW-EXT-INT-CC, class 20 HM |
Appearance: | thixotropic paste |
Colour: | Grey |
Density (g/cm3): | 1.50 |
Dry solids content (%): | 100 |
Brookfield viscosity at +23°C (mPa·s): | 1,900,000 ± 200,000 (rotor F - 5 revs) |
EMICODE: | EC1 R Plus - very low emission |
Application Data (at +23°C and 50% R.H.) | |
Application temperature range: | from +5°C to +35°C |
Skin time: | 35 minutes |
Complete hardening: | 3.5 mm/24 hours - 4.5 mm/48 hours - 8.5 mm/7 days |
Set to light foot traffic: | according to the depth of the joint |
Final Performance | |
Shore A hardness (DIN 53505): | 43 |
Tensile strength (ISO 37 type 3) (N/mm2): – after 28 days at +23°C: | 1.85 |
Elongation at failure (ISO 37 type 3) (%): – after 28 days at +23°C: | 500 |
Resistance to UV rays (ASTM C793): | excellent |
In-service temperature range: | from -40°C to +90°C |
Elongation in service (continuous service) (%): | 20 |
Modulus of elasticity at +23°C (ISO 8339) (N/mm2): | 0.85 |
Springback (%): | 90 |
Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in term of size, type, brand, version, colour, and other relevant characteristics.