KTH Red Oxide Primer 750 Protective Coating Industrial Primer 5L

Description

KTH 750 RED OXIDE PRIMER is fast dry, single component high build alkyd solvent-based primer. It is an economical and general purpose primer for most general industrial steel structural painting. It has good hiding power and good build; and gives low gloss finishing to painted surfaces. A suitable top-coat should be painted over to enhance the performance of the oxide primer.

Uses

As a primer in a multi-coat coating system. Most suitable for use in steel, GI, and other metal surfaces.

Surface Preparation

• Wood: The wood surface must be dry and clean from dirt, grease, defective, and poorly adhering material. Smoothen the surfaces with sandpaper and clean the surface before applying the primer.
• Metal: The metal surface must be dry and clean from dirt, grease, and poorly adhering material. Smoothen the surface with sandpaper or metal brush to remove the rust. Clean the surface after smoothening.
• Old paint surface: Clean all old paint or peeled paint. The surface must be dry and free from grease, rust dust, and other poorly adhering material.

Preparation

• This product is ready to use often stir thoroughly
• However, if thinning is required, not more than 10% KTH Thinner 457 may be added

Safety Data Sheet (SDS).pdf

Technical Data Sheet (TDS).pdf

Disclaimer

All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, color, and other relevant characteristics.